| 電磁流量計的特點 |
| 信息來源： 流量變送器 | 2019-04-29 點擊量： 8172 |
電磁流量計的結構主要由磁路系統、測量導管、電極、外殼、襯里和轉換器等部分組成。
The structure of electromagnetic flowmeter is mainly composed of magnetic circuit system,measuring duct,electrode,shell,lining and converter.
特點：
Characteristic:
1、測量不受流體密度、粘度、溫度、壓力和電導率變化的影響；
2、測量管內無阻礙流動部件，無壓損，直管段要求較低。對漿液測量有獨特的適應性；
3、合理選擇傳感器襯里和電極材料，即具有良好的耐腐蝕和耐磨損性；
4、轉換器采用新穎勵磁方式，功耗低、零點穩定、精確度高。流量范圍度可達150：1；
5、轉換器可與傳感器組成一體型或分離型；
6、轉換器采用16位高性能微處理器，2x16LCD顯示，參數設定方便，編程可靠；
7、流量計為雙向測量系統，內裝三個積算器：正向總量、反向總量及差值總量；可顯示正、反流量，并具有多種輸出：電流、脈沖、數字通訊、HART；
8、轉換器采用表面安裝技術(SMT)，具有自檢和自診斷功能；
9、測量精度不受流體密度、粘度、溫度、壓力和電導率變化的影響，傳感器感應電壓信號與平均流速呈線性關系，因此測量精度高。
10、測量管道內無阻流件，因此沒有附加的壓力損失；測量管道內無可動部件，因此傳感器壽命極長。
11、由于感應電壓信號是在整個充滿磁場的空間中形成的，是管道載面上的平均值，因此傳感器所需的直管段較短，長度為5倍的管道直徑。
12、轉換器采用國際最新最先進的單片機（MCU）和表面貼裝技術（SMT），性能可靠，精度高，功耗低，零點穩定，參數設定方便。點擊中文顯示LCD，顯示累積流量，瞬時流量、流速、流量百分比等。
13、雙向測量系統，可測正向流量、反向流量。采用特殊的生產工藝和優質材料，確保產品的性能在長時候內保持穩定。
1.The measurement is not affected by the changes of fluid density,viscosity,temperature,pressure and conductivity.
2.There are no obstructive flow components,no pressure loss in the measuring tube,and the requirement of straight pipe section is low.It has unique adaptability to slurry measurement.
3.Reasonable selection of sensor lining and electrode materials,that is,good corrosion resistance and wear resistance;
4.The converter adopts a novel excitation mode with low power consumption,zero stability and high accuracy.The flow range can reach 150:1.
5.The converter can be integrated or separated from the sensor.
6.The converter uses 16-bit high-performance microprocessor,2x16LCD display,convenient parameter setting and reliable programming.
7.Flowmeter is a bidirectional measurement system with three integrators:total forward,total reverse and total difference.It can display both positive and negative flow,and has a variety of outputs:current,pulse,digital communication and HART.
8.The converter adopts surface mounting technology(SMT),which has self-inspection and self-diagnosis functions.
9.The measurement accuracy is not affected by the changes of fluid density,viscosity,temperature,pressure and conductivity.The induction voltage signal of the sensor has a linear relationship with the average velocity of flow,so the measurement accuracy is high.
10.There is no obstruction in the measurement pipeline,so there is no additional pressure loss;there is no movable parts in the measurement pipeline,so the sensor has a very long life.
11.Because the induction voltage signal is formed in the whole space filled with magnetic field and is the average value on the pipeline surface,the straight pipe section needed by the sensor is shorter,and the length is five times the diameter of the pipeline.
12.The converter adopts the latest and most advanced MCU and SMT technology in the world.It has reliable performance,high precision,low power consumption,stable zero point and convenient parameter setting.Click on Chinese to display LCD,showing cumulative flow,instantaneous flow,flow rate,flow percentage,etc.
13.Two-way measurement system can measure forward and reverse flow.Special production technology and high-quality materials are adopted to ensure that the product performance remains stable in the long run.
陜ICP備09007751號-1